Tempered glass for Motorola Moto E2 phone, screen guard, protective, 9H + EXTRAS

See why you should truely choose this tempered glass for protection of Motorola Moto E2 phone screen:

• It gives certain protection of the touch screen for your device against scratches and cracks.
• The resistance is at 9H level, due to hardening. Note that also widely recognized as the sharp metal objects as hammers, wrenches, knives, etc. are not able to scratch it. We did our own tests of the proposed tampered glass. We tried to damage the glass applied to the phone by drawing upon it with various objects, including a knife. On the surface, there were not even small scratches. It was not until a very powerful use of screwdriver that led to the appearance of insignificant scratches. Of course, in normal conditions of use it will never happen. In summary, offered glass does not get scratches during normal use of the phone.
• Tempered glass (reinforced) is easy to apply and does not affect the appearance of the phone. Installation is seamless, and all the necessary accessories can be found in package.
• The coating of tempered glass is much more durable to scratches than films of synthetic materials or polycarbonate.
• It is extremely impact resistant, and can withstand even strong knock with a hammer (though of course we do not advise such practices!)
• It is resistant to liquids - one hundred percent waterproof.
• Thickness of tempered glass is only (and as much as) 0.2 - 0.3 mm. It is very thin. What is the result? When applied to Motorola Moto E2 phone it will not impede your daily use of the phone and, for example, putting it in the case.
• It is flexible. We have made attempts to bend the glass. And here is the basic information. Described glass is flexible enough that it perfectly work with the phone. It should be added that it can be mounted so easily on the phone precisely because it is so flexible. BUT: do not try to bend the glass too hard in your hands, because it will probably burst (we "managed to" destroy one glass this way). Remember: this is super-resistant hardened glass, but it is still a glass and after exceeding the limit of elasticity it can shatter.
• When you put the glass on a mobile device, use of additional polycarbonate protective film does not make sense. Having (for the given phone) to choose film and tempered glass, we recommend you to opt for glass.
• It is precisely made - perfectly matching the flat surface of the screen of your phone. It is dedicated to Motorola Moto E2 phone, which means perfect fitting of dimensions and any openings to the millimetre.
• It has anti-fat (oleophobic) surface for easy cleaning. Glass is limiting traces of fingerprints and deposition of various pollutants. And if it gets dirty it is easy to clean it.
• Highly translucent (transparent) - when applied on glass of the phone, it is almost invisible. As it passes through nearly 100% light.
• Increases matrix contrast thanks to antireflection layer.
• Provides hundred percent sensitivity to touch. Once installed, there is no gap between the screen and the protective glass, which means that the sensitivity of the touch screen is not affected. You do not see even a minimum difference in touch with the use of glass and without.
• During a possible breaking glass does not crumble, thanks to the flexible layer applied on the inside. This is very important because it significantly increases the safety of operation of the phone with a glass.
• It absorbs the impact force during a fall – therefore protects the phone against breakage. In the event of impact the energy is absorbed by the protective glass protecting the underneath of the screen. During extreme impact glass will break, but the screen of your mobile phone remains intact, in effect, you are not exposed to the high costs of the repairs. Keep in mind that no security measure can provide 100% protection of phone glass and matrix, but the glass is probably the best safeguard, developed so far.
• The back side is covered with a "sticky" coating (without the traditional glue), which greatly facilitates the installation of glass on the screen of the phone. In addition, the glass is so constructed that during its application no bubbles appear on the screen.
• Very long period of use, and lack of discoloration even after a few years of use. While polycarbonate film requires exchange from time to time, the glass endures much longer – it would probably outlive your phone.
• After you remove glass overlay, phone screen will be as good as new. And when after some time you decide to sell the phone or give it to someone, then after removing the glass, the screen will not differ in any way from a completely new one. Naturally, it is better not to pull off the tempered glass from the screen, as the new buyer will no doubt be satisfied that he has received Motorola Moto E2 phone with a special protection coating.
• You get the product in a very tasteful package, which makes it a great fit for a gift.